Loadhair363

1. Hottinger Baldwin Messtechnik Usb Devices Driver Windows 7
2. Hottinger Baldwin Messtechnik USB Devices Driver
3. Hottinger Baldwin Messtechnik Usb Devices Driver Download
4. Hottinger Baldwin Messtechnik Usb Devices Drivers
5. Hottinger Baldwin Messtechnik Usb Devices Driver Updater

Dear users, According to 1588-2008: 13.5.2.1 originTimestamp (Timestamp) The value of originTimestamp shall be 0 or an estimate no worse than ±1 s of the local time of the originating clock when the Announce message was transmitted. The drivers will be installed, as soon as you click the „Next“ button. The progress bargraph is shown. Click the „Finish“ button. 3.2 Initial Hardware Startup As soon as you connect a supporting device with the USB inter-face of your PC, the installation of the matching device driver is launched. Disclaimer This page is not a piece of advice to remove catmanEasy/AP 3.4.2.52 by Hottinger Baldwin Messtechnik GmbH from your computer, nor are we saying that catmanEasy/AP 3.4.2.52 by Hottinger Baldwin Messtechnik GmbH is not a good application for your PC.

Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45 64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 info@hbm.com. Nicate with the device driver software.

Automation Inside Awards 2018

Here are the Automation Inside Awards 2018 WINNERS. Congratulations!

First place

HBM - Hottinger Baldwin Messtechnik GmbH

HBM – Products and services from virtual to physical testing For over 60 years, the name HBM stands for reliability, precision and innovation..

Second place

Utilcell

UTILCELL is a manufacturer of Load Cells, Mechanical Accessories and Weighing Electronics. Since our beginnings, 40 years ago, we have been leaders..

Third place

Minebea Intec

Minebea Intec is a leading manufacturer of industrial weighing and inspection technologies. With its headquarters in Hamburg, Germany, for around 150..

Minebea Intec

Minebea Intec Weight Controller Maxxis 5

The freely programmable weight controller Maxxis 5 is designed for applications as diverse as Phase, Batching, Filling, IBC, Counting and Truck Weighing. Extensive connectivity options and compatibility with all analogue load cells and the digital Pendeo® load cells as well as platform scales and many more weighing solutions.

• Connection of up to four scales
• 5.7' large colour display with multilingual interface and integrated help function for intuitive operation
• Multiple interface possibilities: Ethernet TCP/IP, Modbus TCP, Profibus DP, DeviceNet, Profinet, Ethernet/IP and USB
• Equipped with an internal web server, the Maxxis 5 can be configured and controlled via any standard web browser
• Automatic backup function saving data to SD cards for full transparency and traceability

NexCOBOT

NexCOBOT MiniBOT-7R Educational Robot Tool Kit

Based on EtherCAT communication standard, NexCOBOT MiniBOT-7R provides an expandable distributed control system. It is also a good material for EtherCAT-related training and the naked frame allows students to easily learn the structure of an industrial robot. MiniBOT-7R includes a utility tool to directly operate the robot. Robotic control API is also provided in Windows platform so that users can leverage its openness to develop any kind of robot applications.

Main Features:

• EtherCAT Communication
• Industrial Robot Design
• Open Development Environment, highly compatible with 3rd party deep learning solution
• Customizable for your own enclosure for Robot Arm by 3D Printing
• Designed with an effective payload of 1 kg.
• Provides Robotic Control API
• The electric control box is provided with 15 DI points and 16 DO points.
• Runs on NexARC runtime (Robot control runtime) and NexMotion Studio (Configuration Utility).
• Uses Motor with Tuque control
• Operation Range: 576.5mm (Maximum): J1: ±167° J2: ±110° J3: ±167° J4: ±175° J5: ±167° J6: ±85° J7: ±180°
• Complete Robotics Curriculum and Training Material Provided
• Safety : 1 x EMG Stop on teach pendant, 1 x EMG Stop on external I/O

Minebea Intec

Minebea Intec Load Cell Inteco® with converter Connexx®

Analogue and digital: the new load cell Inteco comes with an upgrade

The load cell Inteco, a new, innovative enhancement to its successful predecessor, the PR 6201 load cell, provides customers from various industries with a significantly extended range of possibilities – from simple fill quantity control to high-precision weighing of even the heaviest silos and containers.

• The analogue output signal of 2 mV/V sets a standard on the market and ensures flexibility when selecting weighing electronics
• Higher load levels of up to 75 t allow even the heaviest silos and containers to be weighed safely and ensures a more economic weighing solution, for example with three load cells instead of four
• Expanded accuracy classes and increased precision are documented by C6 approval
• A new type of stainless steel makes the load cell Inteco resistant to corrosion and prolongs the service life in challenging environments, such as the chemical industry

Analogue or digital? The load cell Inteco can do both

• Fitted with the converter Connexx, the Inteco can be installed easily and economically without the need for a cable junction box
• Fast signalling times ensure reliable, precise dosing processes and optimal transparency. Weight values can also be generated individually – per load cell – meaning that defective load cells can easily be identified and replaced
• The standard interface CANopen ensures straightforward commissioning and calibration via PC. It is also possible to use cables up to 200 m in length

Utilcell

UTILCELL SWIFT - Weighing Indicator and High Speed Transmitter

UTILCELL (Spain) - The SWIFT is a Weighing Indicator and High-speed Transmitter, especially indicated for Process Weighing & Machinery, in both static and dynamic applications. Now is available with the specific Dosing and Filling Application (APP) turns easy the control of the dosing processes of filling and dosing of materials such as liquid, powder or granules.

Due to its design as well as the many possibilities of data transmission, smart weighing functions, digital inputs and outputs, it is ideal for connection to PLC, PC and remote systems making easy the integration in automated systems. We highlight the ease of commissioning and the reliability improvement and speed of the process without the need to add external control systems.

Its main characteristics are:

• High-speed reading: 2400 measures per second.
• High resolution: 24-bit ADC with 16,000,000 internal divisions and 100,000 external divisions.
• Legal-for-trade IPFNA Legal Weighing Measurement Certification (Non-Automatic Weighing Instruments Weighing Indicator).
• Calibration by masses or in mV/V.
• Calibration sealing by software or mechanically.
• Configuration and calibration by keyboard or computer.
• Selectable digital filters.
• Power up to 8 load cells (350 W) or up to 16 load cells (700 Ω).
• RS-232 & RS-485 communication (Modbus RTU & ASCII).
• PROFIBUS, PROFINET & ETHERNET/IP communication.
• Analogue output configurable at 0-5 V, 0-10 V, 0-20 mA & 4-20 mA, with galvanic isolation.
• 3 Digital opto-isolated inputs with status LED.
• 3 Digital outputs to relay with status LED.
• DIN Rail and Panel mounting versions.

Other regular applications:

• Filling and dosing machines.
• Weighing and level measurement in tanks & silos.
• Check-weigher scales.
• Animal weighing scales.
• Test machinery.
• High-speed dynamic sorting scales.
• Multi-head scales.
• PC/PLC weight transmission.
• Multiple weight indicators in the same bus.

No nominations to this category

Minebea Intec

Minebea Intec Software ProRecipe XT®

ProRecipe XT® is the intuitive recipe management system for all manual and semi-automatic recipe processes.

The innovative software guarantees complete and controlled product safety in the food, pharma and cosmetic industries as well as a wide range of other industries.

• Intuitive monitoring and management of recipe processes
• Flexible integration into production systems
• Guaranteed traceable product quality
• Meets the validation requirements of the pharma industry

Hottinger Baldwin Messtechnik Usb Devices Driver Windows 7

NexCOBOT

NexCOBOT NET 300 Advanced Robot Controller

NexCOBOT NET 300-ARC is an intelligent PC-based advanced robotic controller for robot automation. It integrates NexCOBOT's general robotic control software, NexGRC, and Actin runtime kernel from advanced software and robotic systems developer Energid Technologies, to perform real-time motion control and support redundant robots, such as articulated 7-axis robots, or provide co-robot functions to standard articulated 6-axis robots.

Hottinger Baldwin Messtechnik USB Devices Driver

Specifications:

Hottinger Baldwin Messtechnik Usb Devices Driver Download

Pre-Installed Software Package

• Operating system: Windows Embedded Standard 7
• NexARC Runtime
• NexMotion Studio

NexARC Runtime

• Supported robot type: Articulated 6- & 7-Axis
• Robot control command: PTP/linear/3D arc
• Robot blending motion: Aborting/buffered/ blending
• Ramp profile: T curve/S curve
• Optimized path planning: Joint limit/self-collision avoidance
• Co-Robot function: Hand-guide/collision detect stop
• NexCOBOT EtherCAT Master, CoE and DC supported
• Supports EtherCAT slave

Hottinger baldwin messtechnik network connection. NexMotion Studio

• EtherCAT devices offline edit and online scan
• EtherCAT master configuration
• PDO mapping edit
• Online SDO edit
• Export ENI
• CiA402 device operation: PP/PV/PT/CSP
• Single axis edit and operation
• Robot edit and operation
• I/O mapping edit and operation
• Provides simulation operation mode

A&D Inspection

A&D Inspection ProteX Series X-Ray Inspection Systems

The ProteX Series of X-ray equipment was designed for manufacturers striving to ensure maximum efficiency on their processing lines all within a compact footprint. Now, the most advanced aspects of product inspection can be incorporated into almost any point in production processes.

The new series uses the industry's most advanced imaging technology to provide high-detction sensitivity for a broad range of manufactring applications. Its enhanced imaging capabilities also consistently detect the smallest contaminants, while also conducting product integrity checks.

The A&D ProteX Series features the following benefits:

• The most compact design on the market makes integration painless
• Large 15' color touchscreen and intuitive interface for easy operation
• IP66 rating and easy-to-clean hygenic design
• Superior inspection algorithms include shape dectection, mass detection and enhanced contaminant detection

Find out how ProteX X-ray is making Inspection Simplified.

No nominations to this category

NEXCOM International

NEXCOM NISE 50-IoT Industrial Gateway

NEXCOM NISE 50-IoT industrial gateway is designed to acquire data from PLC or device in the field side, and upload or push it to the database or cloud. The industrial gateway could also take simple logic control without another computer. With these acquired data, it could help users improve their process parameters or predict machine maintenance schedule to reduce down time. The built-in application, IoT-Studio, helps speed up the development and deployment time.

• Ready-to-use IoT Gateway to accelerate IoT project deployment
• Easy connectivity via IoT studio, drag-and-drop managing data flow
• Connect up to 5 devices via Modbus TCP/RTU protocol for data acquisition
• Supports wired or wireless cloud connectivity via publish-subscribe-based MQTT protocol
• Open architecture supports both Windows-based and Ubuntu-based IoT Gateway

Hardy Process Solutions

Hardy Dynamics CIP Checkweigher

The new Dynamic CIP is a specialized clean in place version of the Hardy Dynamics checkweigher designed to meet demands of food and chemical manufacturers. The new Dynamic Checkweigher CIP uses framework that minimizes horizontal flat surfaces, using sloped faces and round tubing where possible, and a sloped cabinet. An enhanced safety conveyer design minimizes entrapment and other hazards from rotating shafts or equipment. Changes to Hardy’s manufacturing techniques helped adapt the Dynamic Checkweigher to meet the sanitary and hygienic standards CIP clients require.

Hottinger Baldwin Messtechnik Usb Devices Drivers

Hardy's Dynamic Series of checkweighing machinery is built using off-the shelf components, with controls based on a Rockwell Automation's CompactLogix platform, providing a standardized open source architecture that is flexible enough to meet both current and future control needs. Running Studio5000®, the GUI uses FactoryTalk View software, giving the user the ability to share and modify information presented on the machine’s HMI to the larger Rockwell The Connected Enterprise®. Extra onboard I/O and the ability to expand the rack provide a future proof control platform that is ready to accommodate additional upstream and downstream closed-loop controls, as well as peripherals such as metal detection and x-rays. All data tags are available to Enterprise wide software.

Weight processing is managed by Hardy’s HI 4050CW weight controller. Sampling weight data at 4,800 times per second, the HI4050CW is capable of providing enough weighments to accurately categorize packages weighing from 5g to 225kg at speeds up to 350 packs per minute.

Minebea Intec

Minebea Intec SPC@Enterprise

The software SPC@Enterprise combines classic filling quantity control with dynamic process control for a wide range of different systems, thereby efficiently supporting quality management of your production processes.

• Efficient networking of a diverse range of devices and systems from Minebea Intec and other vendors

• Fast process control due to powerful monitoring program

• Easily generate production or calibration statistics

• Simple data backup will return a lower risk of data loss

PT Limited

PT Limited PT100SBS-8 Junction Box

The PT100SBS summing boxes are high-quality summing boxes with individual load cell adjustment for the weighing industry with a durable stainless steel housing. Fitted with liquid tight strain relief cable fittings. The PT100SBS accepts a wide range of cable diameters. Enclosed in a tough stainless steel housing, easily accessible yet securely closed and positively sealed by way of its screw-on cover and external fixing holes. Designed and produced for the installer, with jumpers for summing without attenuation and simple to reach and positive control trim pots for load measurement correction. The 8 way also contains surge arrestors appropriate for weighbridge and large tank and silo installations.

Zemic Europe

Zemic Europe Top-Sensors Display WA1

The Top-Sensors Display WA-1 is a display for scale output. This display is suitable for all Top-Sensors transmitters and has a eight-characters alphanumeric matrix. The digits have a height of 60 mm each and 32 LEDS per digit. This display shows 8 digits if the font is normal or 7 digits if the font is set to bold.

Hottinger Baldwin Messtechnik Usb Devices Driver Updater

Detailed specifications Top-Sensors Display WA-1:

• Build-in Brightness regulation
• Build-in option to choose between 2 different fonts
• Opto-isolated RS232 interface
• Serial port RS485
• Opto-isolated current loop interface CL 20mA
• Ingress Protection: IP67

Suited for silo and weighbridge applications!

No nominations to this category

HBM - Hottinger Baldwin Messtechnik GmbH (Germany) - The new HBM WE2111 is a legal-for-trade digital weighing indicator designed for maximum accuracy. It offers a choice of modern communication interfaces, including Ethernet, USB, and RS-485, which makes it ideal for use in industrial or truck scales.
The WE2111 weighing indicator uses the latest Sigma-Delta analog-to-digital converter, so it allows fast, precise weighing when used with strain gauge-based load cells. It offers display resolution of up to 100,000 divisions and an analog-to-digital conversion rate of up to 200 measurements/second. The WE2111’s enhanced sensitivity setting allows using it in legal-for-trade scales with a minimum signal of 0.5 µV/e.
In addition, WE2111 has an EC approval certificate for Class III high-resolution scales with up to 10,000 divisions in single-range mode or two sets of 6,000 divisions in dual-range or dual-division mode. Moreover, the WE2111 complies with Directive 2009/23/EC for non-automatic weighing instruments (NAWI) and meets WELMEC 2.3, 2.8, 7.2, and 8.8 requirements.
Both a DSD (Data Storage Device) and an approved 'Change Log' log file system are available to simplify adapting various functions during legal-for-trade operation. The integrated Viewer program provides additional benefits; it is easy to use and requires no web service. The WE2111 can be fitted with one or two optional modules.
Do you use our WE2110 indicator already? If not, the WE2111 is a drop-in replacement for our earlier WE2110 indicator.
Key features:

• Scale Class III device with up to 10,000 display divisions
• Multi-range/multi-interval with two sets of 6,000 display divisions
• USB and Ethernet interfaces
• Minimum load cell input resistance of 21Ω
• Maximum load cell input resistance of 5,000Ω
• Keys: Gross, Net, Tare, Printing, Function Key
• 1 x RS-232/RS-485 (4-wire)
• 1 x RS-232 for printer/second display
• Panel installation dimensions: 137mm x 66mm
• 12-24 VDC voltage supply or 110-230 VAC mains connection
• Optional modules: eight inputs or outputs, mains module, electrically isolated interfaces, and analog outputs for process industry applications.
• Optional stainless steel enclosure